Carbide Grade Datasheet Review: A Procurement Checklist
Do not approve a tungsten carbide grade datasheet from hardness alone. Check that grade identity, WC-Co composition, grain class, density, porosity, strength, test methods, manufacturing state, and application limits describe the same material, and require lot-level records before a wear part is ordered.
Target Audience and Why This Problem Exists
This guide is for buyers and designers reviewing carbide grade datasheets. A datasheet describes a material family; a purchase order needs a controlled grade and lot evidence.
A Grade Name Is Not an Acceptance Specification
A grade name is an identifier. The same name may mean different cobalt contents, grain distributions, additives, or manufacturing limits at another mill. Start with the supplier, material designation, specification revision, and drawing callout. Broad labels such as K10 or C-2 do not replace a controlled specification.
Read Composition and Microstructure as a Set
Require WC and cobalt content, grain-size range or class, additives where applicable, and the microstructure method. A "fine grain" statement without a range or measurement basis is descriptive, not inspectable.
A peer-reviewed Wear article is titled "Effects of Co content and WC grain size on wear of WC cemented carbide" (DOI:10.1016/j.wear.2005.09.034). The title identifies two variables that should not be hidden behind a grade nickname. Carbidea's production class is YG6X-grade fine-grain WC-Co at approximately 6% Co; this does not make every YG6X-labelled sheet interchangeable with ours.
Check Density and Porosity Evidence
Density is useful when it is tied to the declared grade and method. For Carbidea's YG6X-grade class, the reference density is around 14.9-15.0 g/cm3. Check density by ASTM B311 and apparent porosity by ASTM B276, with the sampling basis and acceptance limit stated. A result outside the declared window is a hold point; one density value does not prove grain size or freedom from porosity.
Review Mechanical Properties on a Common Basis
Record hardness scale, load, method, orientation, and samples. Values from different scales need a documented basis. If transverse rupture strength is reported, require specimen dimensions in mm, span, preparation, and standard; ASTM B406 is one way to identify the test basis. Separate typical values from release limits.
| Datasheet field | Question to ask | Evidence to retain |
|---|---|---|
| Grade and composition | Does the code match the drawing and state WC, Co, and grain class? | Controlled specification |
| Density and porosity | Which methods, sections, and limits apply? | ASTM B311 and B276 records |
| Hardness and strength | Which method turns a value into a release limit? | Test certificate |
Match the Datasheet to the Drawing
A material datasheet does not define the finished component. As-sintered features may carry 0.1-0.25 mm of stock; ground or seating features can be quoted within 0.005-0.01 mm reference tolerance where confirmed by the drawing. ISO H7/s6 applies only where the mating design requires it.
Make the Certificate Traceable
Require lot identification, supplier, grade and revision, test date, laboratory, method, measured result, acceptance limit, and the drawing or purchase-order reference. A certificate that repeats the datasheet without a result does not show what was supplied. Define the order of precedence before the RFQ; if an equivalent grade is proposed, require a written comparison of composition, grain class, density, porosity, properties, and application limits.
A Practical Review Sequence
- Confirm grade identity and drawing revision.
- Compare composition, grain class, density, porosity, and test methods.
- Confirm supply state, tolerances, and lot traceability.
Carbidea reviews grade sheets with the drawing and duty, then coordinates made-to-print carbide work with ISO 9001:2015 partner mills. Drawing reviews and quotations can be returned within 1-2 business days.
Related Products & Topics
- Cross-check carbide grades and C-code references.
- Review ASTM B276 apparent porosity.
- Review Carbidea profile wear parts and tool blanks.
FAQ
Q: Is the highest hardness grade always the best choice?
A: No. Read hardness with toughness, wear mechanism, impact, and geometry. A harder grade can fail when the service mode is chipping or cracking.
Q: Can a supplier substitute an equivalent grade without approval?
A: No. Require a written comparison of composition, grain class, density, porosity, properties, and limits, then get drawing-owner approval.
Q: What is the minimum datasheet package for a carbide wear part?
A: Start with grade identity, composition, grain class, density, porosity, test basis, state, limits, and a lot certificate.